China welding
the best service for you!
Skype Contact Us Sitemap
Home Equipment Consumable Relative Products Workshop Video Company
Products Catalogue

Home>> News

Plasma Cutter vs Oxy Acetylene
Oxy-fuel and plasma cutting systems each have their own advantages and disadvantages. Find out more about how to choose the right one for your needs.
Which Is the Right Tungsten Electrode to Use in My Application?
Choosing the right tungsten is essential for successful TIG welding. You must ensure that the right tungsten is used for the right type of power source, the material to be welded and the thickness of the material.
Gas Cutting Machine Market: Overview
Gas cutters are machines that use a combination of gas and oxygen to cut materials that are usually metal. These machines are also known as oxygen-fuel cutting machines as they use oxygen in the cutting process.
Flux Core Aluminum Welding Wire: What You Need to Know
Does aluminum flux core welding wire even exist? And, can you weld aluminum with a flux core welder? A simple internet search turns up interesting, but mostly unhelpful results that contribute to the confusion.
How to Store Welding Rods?
Soldering is a fun hobby and an impressive career for those who desire to create. However, after the sparks have flowed and the welding has been completed, the welding rods (also known as electrodes) must be stored and put away correctly. But how do you store this holding metal?
Air Carbon Arc Air Planing Technique
The air-carbon arc gas planer removes metal by the intense heat of the electric arc generated between the carbon electrode and the workpiece. As the material melts, compressed air is directed through an outlet in the lower jaw of the torch where the electrode is fixed, thus lifting the molten metal out of the arc before it solidifies.
How to Weld Aluminum With a Wire Welder?
Welding aluminium can be very frustrating as the metal oxidises rapidly in the open air. In addition, oxidation can contaminate the weld seam and in some cases can create a fire hazard.
What Is Gas Cutting Process?
Gas cutting is done by preheating a spot on ferrous metal to its ignition temperature and then burning it with a stream of oxygen in the manner.
How Plasma Cuts Metal?
In cutting electrically conductive metals, the plasma cutting process uses this conductive gas to transfer energy from the power supply through the plasma torch to the metal to be cut.
How to Choose the Right Tungsten Electrode?
Thorium tungsten electrodes, which contain thorium oxide (Th02 or thorium oxide), are the most commonly used tungsten electrodes and have become a standard for judging the goodness of other tungsten electrodes. However, because of the low level of radioactive hazard associated with this tungsten electrode, many users have switched to other options.
How to Distinguish between Welding and Heating Equipment?
Welding is a manufacturing process that uses various fusible substances to join metals or other thermoplastic materials such as plastics through intermolecular contact on their surfaces under heat (or pressure) without being completely melted.
How to Weld Flux Cored Wire?
Flux cored wire CO2 welding, in addition to better welding quality than solid wire, its formation, spatter, beautiful sound! It can reduce the tension of welders. However, the fume level is larger than solid wire, must do a good job of protective measures. Flux cored wire suppliers explain how to weld flux cored wire.
How to Use the Torch Safely?
The torch should comply with the requirements of "Isobaric Torch and Cutting Torch" (JB/T794-1999) and "Injection Suction Torch" (JBT6969 a 1993). At present, the domestic widely used injection torch, its use of the main safety content is as follows.
What is the Working Principle of the Plasma Cutting Machine?
Generally speaking, plasma cutting compared to oxygen-acetylene gas cutting, due to the difference in working principle, so it can cut many jobs that cannot be done by oxygen cutting, to complete the cutting of non-ferrous metals.
How to Tell the Difference Between a Tungsten Electrode and a Bad One?
Tungsten, the metal with the highest melting point, has high density, hardness, wear resistance, corrosion resistance, ultra-high temperature resistance and other high performance, tungsten products are widely used in electronics, new energy, ships, vehicles, engineering machinery, nuclear power, aerospace, aviation, military and other fields.
<< Previous123456789Next>>
Home Equipment Consumable Relative Products Workshop Video Company News
CONTACT US
Add: 181 Taihua Street, Shijiazhuang, China.
Tel: +86-311-87055920 +86-311-85022601
Email: info@sino-welding.com
All right reserved Hebei Machinery Import & Export Co.Ltd. Technical Support Reanod